|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
2322 573 1.... Vishay BCcomponents Surface Mount Multilayer Varistors FEATURES Surface mount multilayer surge suppressor Inherent bidirectional clamping Low capacitance types available Excellent energy/volume ratio Suitable for wave or reflow soldering Compliance to IEC 1000-4-2 Size 0603 (1608M) multilayer chip varistor with AgPd terminations. VALUE 3.2 to 31 2.5 to 25 12 to 65 60 to 480 0.1 30 0.5 -55 to 125 -25 to 45 5 UNIT V V V pF J A ns C C mW QUICK REFERENCE DATA PARAMETER Maximum continuous voltage: DC AC Maximum clamping voltage at 1 A Capacitance range Maximum transient energy (10 1000 ms) Maximum peak current (8 20 ms) Response time Operating temperature range Storage temperature range Maximum continuous dissipation APPLICATIONS Data lines and I/O port protection Protection against EMI and ESD transients On-board protection of ICs and transistors Modem protection LCD protection PACKAGING Available in 8 mm paper tape on reel packaging and in bulk on request. ELECTRICAL DATA AND ORDERING INFORMATION MAXIMUM OPERATING VOLTAGE RMS(1) (V) 2.5 4.0 10.0 14.0 17.0 20.0 25.0 DC (V) 3.2 5.5 14.0 18.0 22.0 26.0 31.0 VOLTAGE(2) at 1 mA MIN. (V) 4.1 6.4 15.3 19.8 24.3 29.7 35.1 MAX. (V) 6.0 9.6 21.0 25.7 29.7 38.6 45.6 MAXIMUM CLAMPING VOLTAGE at 1 A (V) 12 21 35 40 46 56 65 CAP. at 1 kHz (pF) 480 290 110 80 75 70 60 TOL. (%) typ. typ. typ. typ. typ. typ. typ. CATALOG NUMBERS 2322 573..... 12583 10403 11003 11403 11703 12003 12503 Notes 1. The sinusoidal voltage is assumed as the normal operating condition. If a non-sinusoidal voltage is present, type selection should be based on multiplying the peak voltage by a factor of 0.707. 2. The voltage measured at 1 mA meets the requirements of "paragraph 4.3 of CECC specification 42000". Document Number: 29041 Revision: 14-Jun-04 For technical questions contact: nlr.europe@vishay.com www.vishay.com 5 2322 573 1.... Vishay BCcomponents DIMENSIONS in millimeters L W T MAX. 1.0 Surface Mount Multilayer Varistors T W 1.6 0.15 0.8 0.15 L V/I CHARACTERISTIC MAX. LEAKAGE CURRENT 100 MAX. CLAMPING VOLTAGE 1000.000 MAX. LEAKAGE CURRENT MAX. CLAMPING VOLTAGE VOLTAGE (V) VOLTAGE (V) 10 100.000 1 1.0E-05 1.0E-04 1.0E-03 1.0E-02 1.0E-01 1.0E+00 1.0E+01 1.0E+02 CURRENT (A) 57xx1003 57xx0403 57xx2583 10.000 1.0E-05 1.0E-04 1.0E-03 1.0E-02 1.0E-01 1.0E+00 1.0E+01 1.0E+02 CURRENT (A) 57xx2503 57xx2003 57xx1703 57xx1403 TESTS AND REQUIREMENTS TEST / CONDITIONS OF TEST Sub-group A1 Visual examination "IEC 4.3.1" Sub-group A2 Voltage (CECC 4.3); Clamping voltage (CECC B.2.7) Sub-group A3 Dimensions (gauging) "IEC 4.3.3" Sub-group B1 Solderability: Test Td of "IEC 60068-2-20", solder bath method D 235 C 5 C for 5 0.5 s; at 1 mA no visible damage; as in 9.2.1; as specified ND see 4.3.3 ND at 1 mA as specified D OR ND* ND no visible damage PROCEDURE PERFORMANCE * D = Destructive, N = Non-destructive www.vishay.com 6 For technical questions contact: nlr.europe@vishay.com Document Number: 29041 Revision: 14-Jun-04 This datasheet has been downloaded from: www..com Datasheets for electronic components. |
Price & Availability of 232257310403 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |